Blast-Resistant Solutions

Industrial Safe Production Areas

Production areas engineered for facilities with explosion risk, designed to protect personnel and minimise the effects of a blast. They are built from special steel construction with an architecture that disperses energy.

Industrial Safe Production Areas

How it works

A blast-resistant production area protects people and critical equipment while a process with an explosion risk runs next to them. Walls, roof and openings are designed for a defined blast load, so the effect of an explosion in the plant is limited. Layout, doors and ventilation are planned together with the process, not added afterwards.

Typical applications

  • Chemical, energy and defence production lines
  • Rooms next to hazardous process areas
  • Plant areas that must keep working during an incident

Key points when specifying

  • Design blast load at the building location (pressure, impulse, direction)
  • Occupancy: the number of people and how long they stay inside
  • Process interfaces: cable, pipe and duct penetrations and their sealing
  • Siting and orientation relative to the hazard, following API RP 752 or equivalent guidance

Standards and guidance commonly referenced for this product type

  • API RP 752
  • ASCE 59-11
  • UFC 3-340-02

These are general references. Compliance and test reports for a specific product are provided per project.

How is the blast load for a production building defined?

It starts with a hazard study of the process: which materials could explode, how much, and how far from the building. From this, a design blast load (peak pressure, impulse and duration) is set. Recognised guidance such as API RP 752 or ASCE 59-11 describes how buildings are assessed and designed for it.

Is a safe production area the same as a blast-resistant building?

Not exactly. A blast-resistant building is a structure designed for a defined blast load. A safe production area is the working space inside such a structure, or a hardened part of a plant, where people and processes keep operating, so it also covers ventilation, services, access and emergency egress.

Technical specifications, protection levels and test reports are provided per project. Contact our engineers for details.

Planning a protected facility?

Tell us about your site, threat scenario and timeline. Our engineers will respond with the right solution.