Blast-Resistant Solutions

Safe Monitoring Room

Blast-resistant control rooms that let operators monitor operations safely in facilities where an explosion is possible. They protect operator safety while keeping critical operations under supervision.

Safe Monitoring Room

How it works

A blast-resistant monitoring room, or control room, lets operators supervise a plant from a protected place. It has a reinforced structure, a blast-rated door and windows, and a sealed, filtered ventilation inlet if a gas release is possible. Cable and pipe entries are sealed so the protection is not weakened.

Typical applications

  • Plant control rooms near hazardous areas
  • Remote operation of process units
  • Observation posts at industrial sites

Key points when specifying

  • Design blast load and the damage level allowed after the event
  • Whether operators must stay and work during and after an incident
  • Fresh-air supply, pressurisation and, where needed, gas filtration
  • Glazing, doors and cable entries rated for the same load as the walls

Standards and guidance commonly referenced for this product type

  • API RP 752
  • API RP 753
  • ASCE 59-11

These are general references. Compliance and test reports for a specific product are provided per project.

Where should a monitoring room be placed?

As far from the hazard as practical, with entrances on the side away from the likely source. A siting study based on API RP 752 or similar guidance compares the likely blast loads with the strength of the building before the location is fixed.

Can operators stay inside a monitoring room during an incident?

Yes, if the room is designed for it. The room must resist the blast load with limited damage and also keep the interior safe, with sealed penetrations, a controlled air supply and emergency egress. Whether staff stay or evacuate is decided in the project safety study.

Technical specifications, protection levels and test reports are provided per project. Contact our engineers for details.

Planning a protected facility?

Tell us about your site, threat scenario and timeline. Our engineers will respond with the right solution.