Blast & Fire Protection Systems

Flameless Venting Device

Release explosion pressure safely while keeping flames and hot gases from escaping into the surrounding area.

Flameless Venting Device

How it works

A flameless venting device is fitted over a vent opening. When an explosion starts, the expanding gases pass through a stainless steel element that cools them and extinguishes the flame, so the pressure is released without a fireball. This allows venting where a conventional vent cannot discharge outdoors.

Typical applications

  • Dust collectors and silos inside buildings
  • Equipment next to walkways, workstations or other plant
  • Process areas where a vent duct to the outside is impractical

Key points when specifying

  • Volume and shape of the equipment and its design strength
  • The material and its explosion characteristics
  • Mounting position and the free space in front of the device
  • Operating conditions: temperature, humidity and contamination

Standards and guidance commonly referenced for this product type

  • EN 16009
  • EN 14491
  • NFPA 68
  • ATEX 2014/34/EU

These are general references. Compliance and test reports for a specific product are provided per project.

When is flameless venting used instead of a vent panel?

Flameless venting is used when the vent cannot discharge to a safe outdoor area, for example for equipment inside a building. The device must be selected for the specific material and sized for the enclosure, because it changes the pressure that builds up during the explosion. It does not replace a correct explosion risk assessment.

Where is flameless venting used?

On equipment that stands inside a building, where venting flame and pressure to the outside is not possible or not safe. The device releases the pressure but retains the flame and cools the gases.

Technical specifications, protection levels and test reports are provided per project. Contact our engineers for details.

Planning a protected facility?

Tell us about your site, threat scenario and timeline. Our engineers will respond with the right solution.